Gravel Calculator
This gravel calculator works out how much gravel or crushed stone you need, in tons and cubic yards. Enter the area and depth, adjust the density if your supplier gives one, and press Calculate.
Gravel Calculator
How to calculate gravel
Cubic yards = length (ft) × width (ft) × depth (in) ÷ 12 ÷ 27 Tons = cubic yards × density (tons per cubic yard)Example: a 20 × 10 ft path, 4 inches deep: 20 × 10 × 4 ÷ 12 = 66.67 cubic feet. That's 66.67 ÷ 27 = 2.47 cubic yards, and 2.47 × 1.4 = 3.46 tons.
Gravel depth guide
| Project | Typical depth |
|---|---|
| Walkway or garden path | 2–3 inches |
| Patio or shed base | 4 inches, compacted |
| Driveway for cars | 4–6 inches, often in layers |
| Driveway on soft ground or for heavy vehicles | 8–12 inches, in layers |
| Decorative top layer | 1–2 inches |
Why density matters
Quarries sell by the ton, but you measure your project in feet. Density links the two. Larger stones leave more air gaps, wet stone weighs more, and different rock types weigh differently, so the same cubic yard can weigh anywhere from about 1.3 to 1.5 tons. If your supplier quotes a figure for the exact product, enter it above. If you're ordering by the yard instead of the ton, use the cubic yards figure and ignore the tons.
Filling with mulch or soil instead? Use the mulch calculator or the cubic yard calculator.
Frequently asked questions
How many tons of gravel are in a cubic yard?
Usually about 1.4 tons (2,800 lb), with most gravel and crushed stone between about 1.3 and 1.5 tons a yard. It depends on the stone, its size and how wet it is. Your supplier can tell you the figure for the exact product.
How deep should a gravel driveway be?
A common target is about 4–6 inches of compacted gravel for cars, often laid in layers: larger crushed stone at the bottom and smaller stone on top. Soft ground or heavy trucks need more. Walkways usually need 2–3 inches.
How much area does a ton of gravel cover?
At 1.4 tons per cubic yard, one ton is about 19 cubic feet. That covers roughly 58 square feet at 4 inches deep, or 116 square feet at 2 inches.
Should I order extra gravel?
Yes, about 5–10%. Gravel compacts when it's rolled or driven on, and the ground is rarely perfectly level.
See also
- Cubic Yard Calculator: Cubic yards of any bulk material from length, width and depth.
- Mulch Calculator: Cubic yards or bags of mulch for any bed and depth.
- Concrete Calculator: Cubic yards and bag counts for slabs, footings and columns.
- Square Footage Calculator: Area of rooms and odd-shaped spaces, plus a cost estimate.
Last updated: November 16, 2026