Roof Pitch Calculator
This roof pitch calculator finds a roof's pitch, angle and slope from its rise and run, or converts an angle to a pitch. Add the footprint area to get the actual roof area. Choose a tab, fill in the boxes and press Calculate.
Roof Pitch Calculator
Roof pitch formulas
Pitch = rise ÷ run × 12 (written as x/12) Angle = arctan(rise ÷ run) Pitch factor = √(1 + (rise ÷ run)²) Roof area = footprint area × pitch factorExample: a roof that rises 6 inches over 12 inches of run is a 6/12 pitch. The angle is arctan(0.5) = 26.57°, and the pitch factor is √(1 + 0.25) = 1.118. A 1,500 sq ft footprint therefore has about 1,500 × 1.118 = 1,677 sq ft of roof, before overhangs.
Roof pitch table
| Pitch | Angle | Slope | Pitch factor |
|---|---|---|---|
| 1/12 | 4.76° | 8.3% | 1.003 |
| 2/12 | 9.46° | 16.7% | 1.014 |
| 3/12 | 14.04° | 25% | 1.031 |
| 4/12 | 18.43° | 33.3% | 1.054 |
| 5/12 | 22.62° | 41.7% | 1.083 |
| 6/12 | 26.57° | 50% | 1.118 |
| 7/12 | 30.26° | 58.3% | 1.158 |
| 8/12 | 33.69° | 66.7% | 1.202 |
| 9/12 | 36.87° | 75% | 1.250 |
| 10/12 | 39.81° | 83.3% | 1.302 |
| 12/12 | 45° | 100% | 1.414 |
Low, medium and steep roofs
- Below 2/12: low-slope or "flat" roofs. They need membrane or other low-slope roofing, not shingles.
- 2/12 to 4/12: shingles are usually allowed with extra underlayment. Check the maker's instructions.
- 4/12 to 9/12: the most common range for houses.
- Above 9/12: steep roofs, which shed snow well but need extra safety gear to work on.
Working on a ramp, a driveway or a line on a graph? The slope calculator handles any rise and run, and two points.
Frequently asked questions
What does a 6/12 roof pitch mean?
The roof rises 6 inches for every 12 inches (1 foot) it runs horizontally. That's an angle of about 26.57°, or a 50% slope.
How do I measure roof pitch?
Hold a level horizontally against the roof surface or a rafter, mark 12 inches along it, and measure straight down (or up) from that mark to the roof. That measurement is the rise per 12 inches, so 5 inches means a 5/12 pitch. Never measure on a steep or wet roof; you can measure a rafter from the attic instead.
What is a pitch factor?
The number you multiply the flat footprint area by to get the sloped roof area. It's √(1 + (rise ÷ run)²). For a 6/12 roof it's 1.118, so a 1,500 sq ft footprint has about 1,677 sq ft of roof.
What is the lowest pitch for asphalt shingles?
Most shingle makers require at least 2/12, and call for extra underlayment between 2/12 and 4/12. Flatter roofs need a membrane or other low-slope roofing. Check the shingle maker's instructions and your local code.
What is a common roof pitch for houses?
Between about 4/12 and 9/12 for most US homes. Steeper roofs shed snow and rain faster but cost more to build and are harder to walk on.
See also
- Slope Calculator: Slope from two points or rise and run, with y = mx + b.
- Square Footage Calculator: Area of rooms and odd-shaped spaces, plus a cost estimate.
- Board Foot Calculator: Board feet and cost for one board or a lumber list.
Last updated: November 16, 2026