Calculator Bar

Time Card Calculator

Time Card Calculator

Mon
Tue
Wed
Thu
Fri
Sat
Sun
Total hours—

How to calculate hours worked on a time card

  1. Write each start and end time in 24-hour form: 1:30 PM is 13:30.
  2. Subtract the start from the end. If the result is negative, the shift passed midnight, so add 24 hours.
  3. Subtract any unpaid break.
  4. Add up the days.
  5. Convert the minutes to decimal hours by dividing by 60.

Example: 8:00 AM to 4:30 PM with a 30-minute lunch is 16:30 − 8:00 = 8 h 30 min, minus 30 min = 8 h 00 min. Five of those days is 40 hours.

Converting minutes to decimal hours

Payroll systems want decimal hours. Add up the minutes first and convert once at the end, rather than rounding every day. 7 h 45 min is 7.75 hours, not 7.45.

MinutesDecimalMinutesDecimalMinutesDecimal
50.08250.42450.75
100.17300.50500.83
150.25350.58550.92
200.33400.67601.00

Overtime: how it's counted

Under the federal Fair Labor Standards Act, non-exempt employees must be paid at least 1.5 times their regular rate for hours over 40 in a workweek. The workweek is a fixed, repeating 168-hour period set by the employer, and hours aren't averaged across weeks. This calculator uses that weekly rule.

Some states add their own rules. California, for example, also requires overtime after 8 hours in a single workday, and double time in some cases. Salaried "exempt" employees generally don't get overtime at all. If your situation is more complicated than "over 40 hours", check your state labor department's rules.

Regular pay = min(hours, 40) × rate Overtime pay = max(hours − 40, 0) × rate × 1.5 Gross pay = regular pay + overtime pay

Rounding time punches

Many employers round clock-in and clock-out times. Federal rules allow rounding to the nearest 5 minutes, tenth of an hour or quarter hour, as long as it averages out over time and doesn't always favor the employer (29 CFR 785.48). With quarter-hour rounding, a common practice is the "7-minute rule": 1–7 minutes past a quarter hour rounds down, and 8–14 minutes rounds up. This calculator uses your exact times, with no rounding.

Example: a week with an overnight shift

Say you work Monday to Thursday, 9:00 AM to 5:00 PM with a 30-minute lunch (7 h 30 min a day, 30 hours in total), plus a Friday night shift from 10:00 PM to 6:30 AM with no break. The Friday shift ends earlier on the clock than it starts, so add 24 hours: 6:30 + 24:00 − 22:00 = 8 h 30 min. The week totals 38 h 30 min (38.5 hours), so there's no overtime.

This calculator gives estimates for checking your own hours. It isn't payroll or legal advice. State laws and employer policies vary.

Frequently asked questions

How do I convert 8 hours 20 minutes to decimal hours?

Divide the minutes by 60 and add them to the hours: 20 ÷ 60 = 0.33, so 8 hours 20 minutes is 8.33 hours. Don't write it as 8.20 — that would be 8 hours 12 minutes.

Is a lunch break counted as hours worked?

Not if it's a genuine unpaid meal break, usually 30 minutes or more, when you're completely relieved of duty. Short rest breaks of about 5 to 20 minutes are normally paid work time under federal rules. Enter only unpaid break minutes in the Break column.

How is overtime calculated on a time card?

Under the federal Fair Labor Standards Act, non-exempt employees earn at least 1.5 times their regular rate for hours over 40 in a workweek. With 44 hours at $20 an hour, that's 40 × $20 = $800 plus 4 × $30 = $120, for $920. Some states, such as California, also count overtime per day.

How do I count a shift that goes past midnight?

Enter it on the day the shift started, with the real end time. If the end time is earlier than the start time, the calculator adds 24 hours, so 10:00 PM to 6:30 AM counts as 8 hours 30 minutes.

Can I print my time card?

Yes. Press Calculate, then Print time card. Only the time card and the totals are printed, not the rest of the page.

See also

Last updated: November 16, 2026